earphone Excessive wear can also cause changes in sound quality
1. Headset manufacturers, headphone audio plugs Maintenance Audio plug metal coating is generally very thin, if the number of plug, the surface will wear off soon, excessive wear will lead to changes in sound quality, or contact Bad and so on, so it is recommended not to put the headset unplugged, many headphones are now selected gold-plated plug, so for resistance to wear and tear, to ensure good connection helpful.
2. If the headphone cable outside the damage, will directly affect the life of the wire inside. Although the use of materials are different, but comes down, or belong to the rubber products, so pay attention to some of the maintenance of rubber products, such as not to grease, acid, alkali and other things contaminated wire, at different times to use a dry towel clean.
3. Headset manufacturers, temperature and humidity temperature is too high or too much humidity will make the headset damage, especially in the diaphragm on the most obvious performance. So do not make headphones close to these places. Such as direct sunlight, fire, water and so on.
4. Headset manufacturers that headphones should not be stored in the storage box or storage bag to keep the headset dry, both to prevent dust into the speaker affect the sound quality, but also to avoid the headset line break.
1. prevent falling with a headset. Headphones wholesale manufacturers, people once into the deep sleep state will subconsciously turn the opposite side, the body repeatedly twist may be involved in part of the pickles in the wrist (or arm), the wrist on the coil and the ears of both ear in the body twist Moving at the same time the formation of a power contrast, cut off the headset line. For those ear plugs of the catheter for the "heavyweights" once the play may die from what, what sponge sets ah, rubber sets ah will be a permanent cause!
2. Headset wholesale manufacturers analysis, the earplugs must be made before the end of the line to ensure that both ends of the line (close to the end of the headset unit and close to the end of the plug) in a state of micro straight, or walk when the four shaking headset line repeated bending Leading to breakage (metal wire is the biggest taboo is repeated bending).
3. Many earphones will be accompanied by a protective cover (or protective box), since the manufacturers tailor-made for the existence of a certain role in the protection, so use a protective cover can be as much as possible to keep the headset without damage. Both dust and can prevent damage, serve two purposes, why not!
4. Headset wholesale manufacturers about to prevent the corrosive liquid stick to the line body. People's sweat contains corrosive, serious can cause pickles break, so bring the headphones should be as much as possible before the pickles compartment clothes around the body.
- Definition Of Bluetooth Speaker
- Bluetooth Speaker Introduction
- Application Of Bluetooth Speaker
- Bluetooth Speaker Specifications
- Bluetooth Speaker How To Connect To...
- Classification Of Bluetooth Speaker
- Bluetooth How To Connect Bluetooth ...
- The Difference Between WiFi And Blu...
- The Prospect Of Wireless Bluetooth ...
- Bluetooth Speaker – Worth Music The...
- USB Charger The Way To Charge Is
- Speaker Technical Parameters
- Earphone Features Of Earphones
- USB Charger Electronic Equipment
- Speaker Rated Power
- Earphone Play Radiation
- USB Charger Do Not Enter The Power
- Earphone On The Sound
- Speaker Electroacoustic Transducer
- USB Charger Overvoltage Protection